
Spotting Softwashing Misinformation on Social Media
Mark Cave explains why certainty in exterior cleaning Facebook groups is often mistaken for competence and highlights the red flags of bad chemical advice. Learn how to spot trustworthy, evidence-based guidance by focusing on surface identification, test patches, final applied percentages, and proper safety controls.
Chapter 1
The Trap of Confident Misinformation
Mark Cave
You are sitting in your van between jobs, scrolling through a Facebook group or an exterior cleaning forum. Someone has posted a photo of a stained render wall and asked how to clean it. Within three minutes, there are twenty replies. One person says, just whack neat hypo on it and walk away. Another says, five to one mix, no need to rinse, job done. Both comments sound completely certain. Both have a handful of likes. And if you are standing on a job tomorrow facing that same wall, it is very tempting to take that advice at face value.
Mark Cave
I am Mark Cave from SoftWash UK, and today we are looking at one of the biggest traps in our industry right now: confident misinformation on social media. Over the years I have seen plenty of contractors get into real trouble, not because they were lazy, and not because they wanted to cut corners, but because they followed a confident comment online without realising how much context was missing.
Mark Cave
In exterior cleaning groups, certainty is often mistaken for competence. When someone writes with total authority, it feels reassuring. You assume they must have done it a hundred times. The problem is that a comment section does not show you their insurance, their training, or what that wall looked like six months later. It does not tell you whether they damaged the surrounding plants, etched a window, or stripped a coating off a roof tile. Just because someone sounds sure of themselves does not mean their method is safe, compliant, or repeatable.
Mark Cave
So how do you tell the difference between experienced, evidence based guidance and confident guesswork? Let us look at the red flags first. The biggest one is the one size fits all recipe. Whenever you see someone throwing out a magic ratio without asking a single question, alarm bells should ring. Copying a mix from a post online is risky because you do not know their stock strength, the weather on the day, or the porosity of the surface they were cleaning. A five to one mix means completely different things depending on whether you are starting with ten percent or fifteen percent sodium hypochlorite, and whether it has been sitting in a warm van for three months.
Mark Cave
Another major red flag is advice that ignores surface identification, age, and condition. Render is not just render. Monocouche behaves differently to painted masonry, and older lime mortar behaves differently again. If someone gives you a chemical recommendation without asking what the surface actually is, they are guessing. The same goes for anyone who tells you to skip a test patch. A test patch is not a waste of time. It is how you protect yourself and your customer before committing to the whole elevation.
Mark Cave
Watch out as well for anyone who dismisses PPE, COSHH, or environmental runoff controls. Comments like, I never bother with a mask, or, just wash it down the drain, are not signs of a seasoned pro. They are signs of someone taking shortcuts that could land you with a fine, an injury, or a ruined garden. And be very wary of people bragging about using maximum chemical strength. More strength is not a badge of honour. Using the strongest mix possible when a gentler, controlled approach would do the job properly just wastes chemical, increases risk, and shows a lack of understanding.
Chapter 2
Spotting Trustworthy Advice and Building Real Competence
Mark Cave
Now let us flip it around. What does trustworthy, evidence based advice actually look like online? In my experience, the contractors who genuinely know their craft rarely give you an instant, blunt answer. Instead, they ask questions first. They want to know what the surface is, how old it is, whether it is shaded or in direct sunlight, what the weather is doing, and what type of staining you are dealing with. Is it organic algae, or is it rust, carbon, or efflorescence? Because if it is inorganic staining, throwing sodium hypochlorite at it will do nothing at all.
Mark Cave
Good professionals also explain the why behind their recommendation. They do not just tell you what to spray. They explain how the chemistry works, what dwell time you need, and why you might need to pre wet surrounding plants or control runoff. You will also notice they talk in terms of final applied percentages and product labels rather than vague bucket ratios. Referencing the actual percentage hitting the wall, alongside the manufacturer guidance, shows they understand chemical control rather than guesswork.
Mark Cave
They will also emphasise safety, documentation, and testing. They will remind you to check the Safety Data Sheet, carry out a proper site survey, and do a small test patch in an inconspicuous area. That kind of advice might not sound as flashy as a quick fix comment, but it is the advice that keeps your business safe and your results consistent.
Mark Cave
So here is how to put this into practice. Treat social media as a starting point for ideas, never as a substitute for technical understanding. If you see a method or a product mentioned online, verify it. Check the product label, read the Safety Data Sheet, and weigh it up against what you can see on your own site survey. Build your competence through structured learning rather than trial and error from comment sections. Remember, professional softwashing is about understanding the process, not just buying chemicals or copying what someone else posted online.
Mark Cave
If you want reliable, structured education and ongoing technical support you can actually trust, have a look at the CPD Certified Softwash Training Course at softwashing.uk. It takes you through the chemistry, surface identification, safety, and real world application at your own pace, and gives you a clear pathway to becoming an Approved Softwash Applicator and joining the National Association of Softwash community. Next time you see a confident comment online, ask yourself one simple question: can they explain why it works, or are they just guessing? Thanks for joining me, and I will catch you in the next episode.