
Mastering Sodium Hypochlorite: Dilutions, Safety and Control
Mark Cave explains why sodium hypochlorite is not a universal cleaner and how to calculate dilutions from actual stock strength for organic contamination. Learn essential site controls, PPE requirements, chemical compatibility rules, and how surfactants help you work safely and profitably.
Chapter 1
Why Hypo Is Not Household Bleach
Mark Cave
One of the biggest mistakes I see contractors making is treating professional sodium hypochlorite like a bottle of household bleach you pick up from the supermarket. They see a dirty wall or a green patio, they glug a bit of chemical into a tank, and they hope for the best. And when it goes wrong, it can be a very expensive lesson.
Mark Cave
I'm Mark Cave, founder of SoftWash UK, and over the years I've seen just about every mistake you can make with exterior cleaning chemistry. Today I want to talk about why sodium hypochlorite, or hypo as we call it in the trade, demands proper respect, how it actually works, and what you need to do to use it safely and profitably.
Mark Cave
First, let's get clear on what sodium hypochlorite actually is. It is a professional oxidising cleaning agent, and it is brilliant at breaking down organic contamination. When you are dealing with green algae on render, black mould on masonry, mildew, lichen spotting on stone or roof tiles, or biofilm on gutters and fascias, hypo is your go to tool. It oxidises that biological growth and breaks it down.
Mark Cave
Where people come unstuck is treating it like a universal cleaner. It is not. Sodium hypochlorite will not remove rust, oil, efflorescence, tannin staining, paint oxidisation, or mineral deposits. I see less experienced operators all the time who spot a stain on a driveway or a rendered wall, reach straight for the hypo, and then wonder why the mark is still staring back at them. Worse still, using the wrong chemistry can waste your product and actually make the job harder to fix afterwards.
Mark Cave
Another thing many contractors overlook is stock strength. In the UK, professional sodium hypochlorite is commonly supplied at 14% to 15% available chlorine. That is a serious concentration compared to anything you would use under the kitchen sink. But here is the catch: sodium hypochlorite degrades over time. If it has been sitting in a warm van, or stored in direct sunlight, it loses strength. So you have to calculate your dilutions from the actual strength of the product you have in front of you, not what you hope it is.
Mark Cave
And when you are mixing, the golden rule is simple: use the lowest effective concentration that will do the job. Stronger is not automatically better. Glugging extra chemical into the tank just increases the risk to the surface, to nearby plants, to metals, and to you. Proper softwashing is about understanding the surface and the contamination, not throwing neat chemical at a wall and hoping.
Chapter 2
Controlling the Mix and the Site
Mark Cave
Once you have your dilution right, the next piece of the puzzle is control. On vertical render, cladding, or pitched roof tiles, a plain mix of water and hypo will often just run straight off before it has time to work. That is where a good bleach compatible surfactant, like our Clever Wash Surfactant, makes a massive difference. It helps the mix cling to the surface, wets the contamination evenly, and cuts down rapid runoff so you are not wasting chemical.
Mark Cave
But do not fall into the trap of thinking surfactant makes a job safe on its own. A clinging mix stays active for longer, which means your site controls still matter just as much. Most sodium hypochlorite incidents in exterior cleaning are completely avoidable. They happen because someone rushed the job, used an over strength mix, ignored the flowerbeds underneath, or mixed chemicals without checking compatibility.
Mark Cave
Let's be crystal clear on chemical compatibility. You must never mix sodium hypochlorite with acids, descalers, rust removers, or ammonia. Doing that can release toxic chlorine gas, and that is a genuine emergency. Always keep incompatible products segregated, and never mix anything unless you know for a fact it is safe.
Mark Cave
Before you even open a drum on site, read the Safety Data Sheet and complete your COSHH assessment and a site specific risk assessment. Make sure you are wearing proper PPE. That means chemical resistant gloves, proper eye protection or a face shield, long sleeves or coveralls, waterproof boots with good grip, and respiratory protection if mist or spray drift is a risk. Ordinary work gloves and sunglasses will not cut it. Hypo wicks into normal fabric and can cause real skin and eye damage.
Mark Cave
On the ground, protect your surroundings before you spray. Pre wet plants and lawns, cover sensitive planting where needed, block drains if there is a risk of runoff entering watercourses, and put out cones, barriers, and signage to keep the public and pets well away from wet areas. That is what separates a professional contractor from someone just splashing chemical about.
Mark Cave
Knowledge always comes before products. If you want to build real confidence with sodium hypochlorite, dilution ratios, surface identification, and COSHH compliance, take a look at the SoftWash UK Certified Approved Soft Wash Applicator Training Course at softwashing.uk. It is an online course I wrote from years of real world experience, and you can complete it at your own pace with no time limits. Finishing the training also opens the door to becoming an Approved Softwash Applicator and joining the National Association of Softwash community.
Mark Cave
Take a look at your current setup this week and ask yourself if your dilution, your PPE, and your site paperwork are genuinely up to scratch. Thanks for listening, and I'll see you in the next episode.